IDCORE interface tutorials

If you observe  a constant flick between the IDCORE display and factory reverse image, this is due to your vehicles […]

Troubleshooting steps for touch overlay Ensure the ribbon cable is not pinched, damaged or crimped in any way. If there […]

Android Auto Audio Quality When using Android Auto, the ‘Master Volume’ setting should be adjusted to approximately 30-35 to avoid […]

To change the default logo on the IDCORE interface From the IDCORE main menu, go to the SETUP menu Select […]

How to enable CarPlay music playback via factory Bluetooth audio streaming Your vehicle must support Bluetooth audio streaming. Only iPhone […]

How to perform touch calibration (Only available for modules listed below) To perform calibration, find relevant dip switch for your […]

Dip Switch 8 ON for OEM Camera/No Jaguar F-Type (IDC-JLRBSCRR) – Short press NAV to enter, any other button to […]

I don’t have display This could be caused by incorrect DIP switch settings or incorrect wiring connection. There are 8 […]

I don’t hear sound from Apple CarPlay/Android Auto This could be caused by an incorrect setting or incorrect audio connection. […]